Support Components


HT manufacture various type of pressure vessel support, from top to bottom.



1.Leg support

Leg support are used as the support stand for pressure vessel.  They are specifically designed to support dish end.

2.Support Pad

A form of spread foundation formed by rectangular, square, or sometimes circular concrete ‘pads’ that support localised single-point loads such as structural columns, groups of columns or framed structures HT manufacture various type of support pad. These support pads are used to support single-point load and hold pipe or hose.


Brackets are projections that carry loads. The connection of a bracket to a support has to transmit both shear and moment. Fasteners or welds may be used for the purpose. Connections may be made with fasteners or welds subjected only to shear or to combined shear and tension.

4.Angle frame

A basic structure designed to bear a load in a lightweight economical manner.


A mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.

Type Dimension (mm) Dish head Radius (mm) Thickness (mm) Material
Leg support H: 93-920 1115-3765 7.5-20 SA240 1B


SA-105 GR B

Support Pad Rectangle

L:    80-1830

W:   50-785


OD: 57-825

301-3000 3-40 SA240 1B

SA240 2B


Bracket L:  27-178

W: 26-155

H:  16-240

1-10 SA240 1B

SA240 2B


Angle frame L:  887-1687

W: 100-490

5 EA50 Angle bar
Gasket PCD: 63.5-110

OD:   84-146

3 PTFE with 25% glass fiber